MasterEmaco S 810 - Cementitious spray applied repair mortar

How does MasterEmaco S 810 work?

MasterEmaco S 810 is a ready-to-use, cement based spray applied repair mortar with reduced rebound. It is specially designed for civil and mining applications using either the wet or dry shotcreting systems. It gives high early strength, reduced rebound and allows for maximum application thickness and with resistivity values in the range accepted for cathodic protection (CP) overlays.

Recommended uses:

  • Repairs to the underside of bridge decks, bridge piers and beams, tunnels, drains, sea walls, and culverts.
  • Reinstating of eroded concrete in sewers prior to the application of MasterEmaco S 880
  • Tunnel linings and embankment stabilization.
  • Refurbishment of columns, bridges, tunnels and retaining walls.
  • Single high build application.
  • Repair of fire damaged structures, marine structures, piers, quays, off shore platforms, etc.
  • Cathodic protection overlays.

What makes MasterEmaco S 810 a unique solution?

MasterEmaco S 810 is a high quality dry shotcrete with non-sag characteristics that reduces cost of application for large thickness repair

What are the features and benefits of MasterEmaco S 810?

  • Factory mixed – No onsite variations
  • Easy to use – Requires only the addition of potable water for mixing or spraying
  • Economical – Reduces handling and clean-up costs and speeds up repairs
  • Versatile – Is easily sprayed using the wet mix shotcrete system or dry mix systems
  • Good working time – Over one hour at 23°C
  • Controlled shrinkage – Reduced cracking tendency
  • Low resistivity – suitable for cathodic protection overlays.

MasterEmaco S 810

Ready-to-use, cement based spray applied repair mortar with reduced rebound

MasterEmaco P 130

Two component, solvent borne zinc rich epoxy primer, providing active galvanic protection to steel

MasterEmaco S 346

Dual shrinkage compensated, high flow, high strength formulation for structural concrete repairs

MasterEmaco S 348

Dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs

MasterEmaco S 466

Dual shrinkage compensated, high flow,high strength formulation for structural concrete repairs

MasterEmaco S 488

Dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs

Downloads

MasterEmaco P 130 Technical Data Sheet (ref.: MasterEmacoP130/01/0313)

pdf (187.91 Kb)

MasterEmaco S 346 Technical Data Sheet (ref.: MasterEmacoS 346/01/0313 )

pdf (201.91 Kb)

MasterEmaco S 348 Technical Data Sheet (Ref.: MasterEmacoS 348/01/0313)

pdf (212.07 Kb)

MasterEmaco S 466 Technical Data Sheet (ref.: MasterEmacoS466/01/0313)

pdf (209.05 Kb)

MasterEmaco S 488 Technical Data Sheet (ref.: MasterEmacoS488/01/0313)

pdf (204.79 Kb)